Preowned in good overall condition. Scuffs and scratche son most sides. Knobs and ports are in goo used condition. Pad is slightly dirty and worn. See all photos. Works properly.
Nootropic Synthino XM Polyphonic MIDI Synthesizer Guitar Effect Pedal Good used condition Fully assembled and tested. Includes USB cable and rubber feet. Description The Synthino XM™ is a powerful polyphonic synthesizer with unique features running on a powerful hardware platform. It has a compact, rugged tabletop design that is also beautiful. Most importantly, it is really fun to play whether you are a musician or you just want to make some noise. Synthino XM features 3 modes: synthesizer mode, arpeggiator mode, and “live” groovebox sequencer mode. About Synthino XM The Synthino XM™ is powerful polyphonic synthesizer with unique features running on a powerful hardware platform. It has a compact, rugged tabletop design that is also beautiful. Most importantly, it is really fun to play whether you are a musician or you just want to make some noise. Synthino XM was designed by Michael Krumpus of nootropic design, and Alex Dyba of GetLoFi. To launch Synthino XM they created a very successful Kickstarter campaign that was successfully funded and 100% sold out. Synthino XM Features 5-note polyphony for superb playability 12 waveforms, 5 drum samples (kick, snare, hi-hat, tom, clap), and noise generator 12-bit audio at 25KHz output rate 4 MIDI channels, each with separate waveform and ADSR envelope settings MIDI over 5-pin MIDI jack or USB MIDI over USB works with DAW software on Mac, Windows, iOS, Android low pass filter with cutoff frequency and resonance controls 2 independent low frequency oscillators (LFOs): pitch and filter selectable waveform for LFOs 1V p-p audio output voltage with enough current to drive headphones arpeggiator mode, up to 16 notes 4 arpeggiator patterns: up, down, up-down, random 4 built-in arpeggiator chords or use MIDI to specify up to 16 notes arpeggiator pitch transposition control tempo control with MIDI clock input 16-step live performance “groovebox” sequencer save/load patches and sequences in EEPROM pitch fine-tuning adjustment programmable/upgradable over USB Hardware 1/4 inch ( 6.35 mm ) output jack: Works with headphones, line output for recording, and direct connecting to standard guitar amplifier. We will include a 1/4 to 1/8 inch stereo adapter with each Synthino XM for headphone/earbud use. When running on 9 volt battery power, the unit turns off when the audio plug is removed. Standard 5-pin MIDI input jack: This allows you to plug-in any standard MIDI keyboard, interface, sequencer, or drum machine to control the Synthino XM. USB mini jack: Allows MIDI over USB functionality. This modern implementation enables sequencing and control from iOS, Android, PC, and Mac devices. It can also be used to upgrade firmware using a simple upload utility. Synthino XM can also be powered from the USB port of cell phone charger, laptop power, or battery pack. Laser-cut acrylic cover: Frosted acrylic gives the Synthino XM a gorgeous finish. We searched far and wide for acrylic with just the right look. Four orange LEDs emit a warm, diffused glow from beneath the acrylic. 3 Fun Modes The Synthino XM has 3 modes: synthesizer, arpeggiator, and groovebox. When Synthino XM is powered on, all the LEDs blink, prompting you to select a mode. Synthesizer mode allows you to play the Synthino XM with a MIDI controller connected to the MIDI jack or from your favorite DAW (digital audio workstation) software with MIDI over USB. You can also play the synthesizer in standalone mode using note buttons. Explore different sounds by changing the waveform, controlling the note envelope parameters (ADSR – attack, decay, sustain, release), modulating the pitch and filter with independent LFOs for each, and adjusting the low pass filter. Arpeggiator mode lets you play predefined arpeggios or set your own arpeggio notes with MIDI. There are 4 patterns: up, down, up-down, and random. And you can cycle through predefined 4-note chord arpeggios: major, minor, M7, and m7, or to select MIDI mode which creates an arpeggio with currently played MIDI notes (up to 16 notes!). Of course you can change the speed (BPM), transpose arpeggios up and down, and modify the envelope, waveform, and filter parameters. There’s a ton of fun to be had, even when using the arpeggiator in standalone mode without any MIDI input. Groovebox mode is the most sophisticated feature of the Synthino XM. It is a “live” 16-step sequencer which allows you to lay down 4 different tracks by playing a MIDI controller. When the sequencer is running, any note or drum sample you play will be recorded to the current track and repeated as the sequencer runs. Each track can have its own envelope settings. The individual notes on a single track can even have different waveforms, so you can create very rich, complex sequences. The Synthino XM groovebox mode is incredibly powerful and expressive. No musical talent is required to make great sounding sequences! You can even save them to memory for later playback.
